From 8899e96c8c77bd397063091a56263257d47c601a Mon Sep 17 00:00:00 2001 From: greglebreton Date: Fri, 4 Mar 2022 16:13:00 +0100 Subject: [PATCH] clean up --- jail.conf | 888 ------------------------------- jail.local | 84 --- nginx-conf/nginx-badbots.conf | 25 - nginx-conf/nginx-botsearch.conf | 23 - nginx-conf/nginx-conn-limit.conf | 10 - nginx-conf/nginx-http-auth.conf | 17 - nginx-conf/nginx-limit-req.conf | 46 -- nginx-conf/nginx-nohome.conf | 6 - nginx-conf/nginx-noproxy.conf | 7 - nginx-conf/nginx-req-limit.conf | 9 - 10 files changed, 1115 deletions(-) delete mode 100644 jail.conf delete mode 100644 jail.local delete mode 100644 nginx-conf/nginx-badbots.conf delete mode 100644 nginx-conf/nginx-botsearch.conf delete mode 100644 nginx-conf/nginx-conn-limit.conf delete mode 100644 nginx-conf/nginx-http-auth.conf delete mode 100644 nginx-conf/nginx-limit-req.conf delete mode 100644 nginx-conf/nginx-nohome.conf delete mode 100644 nginx-conf/nginx-noproxy.conf delete mode 100644 nginx-conf/nginx-req-limit.conf diff --git a/jail.conf b/jail.conf deleted file mode 100644 index 5075e0c..0000000 --- a/jail.conf +++ /dev/null @@ -1,888 +0,0 @@ -# customize settings for your setup. -# -# Changes: in most of the cases you should not modify this -# file, but provide customizations in jail.local file, -# or separate .conf files under jail.d/ directory, e.g.: -# -# HOW TO ACTIVATE JAILS: -# -# YOU SHOULD NOT MODIFY THIS FILE. -# -# It will probably be overwritten or improved in a distribution update. -# -# Provide customizations in a jail.local file or a jail.d/customisation.local. -# For example to change the default bantime for all jails and to enable the -# ssh-iptables jail the following (uncommented) would appear in the .local file. -# See man 5 jail.conf for details. -# -# [DEFAULT] -# bantime = 1h -# -# [sshd] -# enabled = true -# -# See jail.conf(5) man page for more information - - - -# Comments: use '#' for comment lines and ';' (following a space) for inline comments - - -[INCLUDES] - -#before = paths-distro.conf -before = paths-debian.conf - -# The DEFAULT allows a global definition of the options. They can be overridden -# in each jail afterwards. - -[DEFAULT] - -# -# MISCELLANEOUS OPTIONS -# - -# "ignorself" specifies whether the local resp. own IP addresses should be ignored -# (default is true). Fail2ban will not ban a host which matches such addresses. -#ignorself = true - -# "ignoreip" can be a list of IP addresses, CIDR masks or DNS hosts. Fail2ban -# will not ban a host which matches an address in this list. Several addresses -# can be defined using space (and/or comma) separator. -#ignoreip = 127.0.0.1/8 ::1 - -# External command that will take an tagged arguments to ignore, e.g. , -# and return true if the IP is to be ignored. False otherwise. -# -# ignorecommand = /path/to/command -ignorecommand = - -# "bantime" is the number of seconds that a host is banned. -bantime = 10m - -# A host is banned if it has generated "maxretry" during the last "findtime" -# seconds. -findtime = 10m - -# "maxretry" is the number of failures before a host get banned. -maxretry = 5 - -# "backend" specifies the backend used to get files modification. -# Available options are "pyinotify", "gamin", "polling", "systemd" and "auto". -# This option can be overridden in each jail as well. -# -# pyinotify: requires pyinotify (a file alteration monitor) to be installed. -# If pyinotify is not installed, Fail2ban will use auto. -# gamin: requires Gamin (a file alteration monitor) to be installed. -# If Gamin is not installed, Fail2ban will use auto. -# polling: uses a polling algorithm which does not require external libraries. -# systemd: uses systemd python library to access the systemd journal. -# Specifying "logpath" is not valid for this backend. -# See "journalmatch" in the jails associated filter config -# auto: will try to use the following backends, in order: -# pyinotify, gamin, polling. -# -# Note: if systemd backend is chosen as the default but you enable a jail -# for which logs are present only in its own log files, specify some other -# backend for that jail (e.g. polling) and provide empty value for -# journalmatch. See https://github.com/fail2ban/fail2ban/issues/959#issuecomment-74901200 -backend = auto - -# "usedns" specifies if jails should trust hostnames in logs, -# warn when DNS lookups are performed, or ignore all hostnames in logs -# -# yes: if a hostname is encountered, a DNS lookup will be performed. -# warn: if a hostname is encountered, a DNS lookup will be performed, -# but it will be logged as a warning. -# no: if a hostname is encountered, will not be used for banning, -# but it will be logged as info. -# raw: use raw value (no hostname), allow use it for no-host filters/actions (example user) -usedns = warn - -# "logencoding" specifies the encoding of the log files handled by the jail -# This is used to decode the lines from the log file. -# Typical examples: "ascii", "utf-8" -# -# auto: will use the system locale setting -logencoding = auto - -# "enabled" enables the jails. -# By default all jails are disabled, and it should stay this way. -# Enable only relevant to your setup jails in your .local or jail.d/*.conf -# -# true: jail will be enabled and log files will get monitored for changes -# false: jail is not enabled -enabled = false - - -# "mode" defines the mode of the filter (see corresponding filter implementation for more info). -mode = normal - -# "filter" defines the filter to use by the jail. -# By default jails have names matching their filter name -# -filter = %(__name__)s[mode=%(mode)s] - - -# -# ACTIONS -# - -# Some options used for actions - -# Destination email address used solely for the interpolations in -# jail.{conf,local,d/*} configuration files. -destemail = root@localhost - -# Sender email address used solely for some actions -sender = root@ - -# E-mail action. Since 0.8.1 Fail2Ban uses sendmail MTA for the -# mailing. Change mta configuration parameter to mail if you want to -# revert to conventional 'mail'. -mta = sendmail - -# Default protocol -protocol = tcp - -# Specify chain where jumps would need to be added in ban-actions expecting parameter chain -chain = - -# Ports to be banned -# Usually should be overridden in a particular jail -port = 0:65535 - -# Format of user-agent https://tools.ietf.org/html/rfc7231#section-5.5.3 -fail2ban_agent = Fail2Ban/%(fail2ban_version)s - -# -# Action shortcuts. To be used to define action parameter - -# Default banning action (e.g. iptables, iptables-new, -# iptables-multiport, shorewall, etc) It is used to define -# action_* variables. Can be overridden globally or per -# section within jail.local file -banaction = iptables-multiport -banaction_allports = iptables-allports - -# The simplest action to take: ban only -action_ = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"] - -# ban & send an e-mail with whois report to the destemail. -action_mw = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"] - %(mta)s-whois[name=%(__name__)s, sender="%(sender)s", dest="%(destemail)s", protocol="%(protocol)s", chain="%(chain)s"] - -# ban & send an e-mail with whois report and relevant log lines -# to the destemail. -action_mwl = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"] - %(mta)s-whois-lines[name=%(__name__)s, sender="%(sender)s", dest="%(destemail)s", logpath=%(logpath)s, chain="%(chain)s"] - -# See the IMPORTANT note in action.d/xarf-login-attack for when to use this action -# -# ban & send a xarf e-mail to abuse contact of IP address and include relevant log lines -# to the destemail. -action_xarf = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"] - xarf-login-attack[service=%(__name__)s, sender="%(sender)s", logpath=%(logpath)s, port="%(port)s"] - -# ban IP on CloudFlare & send an e-mail with whois report and relevant log lines -# to the destemail. -action_cf_mwl = cloudflare[cfuser="%(cfemail)s", cftoken="%(cfapikey)s"] - %(mta)s-whois-lines[name=%(__name__)s, sender="%(sender)s", dest="%(destemail)s", logpath=%(logpath)s, chain="%(chain)s"] - -# Report block via blocklist.de fail2ban reporting service API -# -# See the IMPORTANT note in action.d/blocklist_de.conf for when to use this action. -# Specify expected parameters in file action.d/blocklist_de.local or if the interpolation -# `action_blocklist_de` used for the action, set value of `blocklist_de_apikey` -# in your `jail.local` globally (section [DEFAULT]) or per specific jail section (resp. in -# corresponding jail.d/my-jail.local file). -# -action_blocklist_de = blocklist_de[email="%(sender)s", service=%(filter)s, apikey="%(blocklist_de_apikey)s", agent="%(fail2ban_agent)s"] - -# Report ban via badips.com, and use as blacklist -# -# See BadIPsAction docstring in config/action.d/badips.py for -# documentation for this action. -# -# NOTE: This action relies on banaction being present on start and therefore -# should be last action defined for a jail. -# -action_badips = badips.py[category="%(__name__)s", banaction="%(banaction)s", agent="%(fail2ban_agent)s"] -# -# Report ban via badips.com (uses action.d/badips.conf for reporting only) -# -action_badips_report = badips[category="%(__name__)s", agent="%(fail2ban_agent)s"] - -# Report ban via abuseipdb.com. -# -# See action.d/abuseipdb.conf for usage example and details. -# -action_abuseipdb = abuseipdb - -# Choose default action. To change, just override value of 'action' with the -# interpolation to the chosen action shortcut (e.g. action_mw, action_mwl, etc) in jail.local -# globally (section [DEFAULT]) or per specific section -action = %(action_)s - - -# -# JAILS -# - -# -# SSH servers -# - -#[sshd] - -# To use more aggressive sshd modes set filter parameter "mode" in jail.local: -# normal (default), ddos, extra or aggressive (combines all). -# See "tests/files/logs/sshd" or "filter.d/sshd.conf" for usage example and details. -#mode = normal -#port = ssh -#logpath = %(sshd_log)s -#backend = %(sshd_backend)s - - -[dropbear] - -port = ssh -logpath = %(dropbear_log)s -backend = %(dropbear_backend)s - - -[selinux-ssh] - -port = ssh -logpath = %(auditd_log)s - - -# -# HTTP servers -# - -[apache-auth] - -port = http,https -logpath = %(apache_error_log)s - - -[apache-badbots] -# Ban hosts which agent identifies spammer robots crawling the web -# for email addresses. The mail outputs are buffered. -port = http,https -logpath = %(apache_access_log)s -bantime = 48h -maxretry = 1 - - -[apache-noscript] - -port = http,https -logpath = %(apache_error_log)s - - -[apache-overflows] - -port = http,https -logpath = %(apache_error_log)s -maxretry = 2 - - -[apache-nohome] - -port = http,https -logpath = %(apache_error_log)s -maxretry = 2 - - -[apache-botsearch] - -port = http,https -logpath = %(apache_error_log)s -maxretry = 2 - - -[apache-fakegooglebot] - -port = http,https -logpath = %(apache_access_log)s -maxretry = 1 -ignorecommand = %(ignorecommands_dir)s/apache-fakegooglebot - - -[apache-modsecurity] - -port = http,https -logpath = %(apache_error_log)s -maxretry = 2 - - -[apache-shellshock] - -port = http,https -logpath = %(apache_error_log)s -maxretry = 1 - - -[openhab-auth] - -filter = openhab -action = iptables-allports[name=NoAuthFailures] -logpath = /opt/openhab/logs/request.log - - -[nginx-http-auth] - -port = http,https -logpath = %(nginx_error_log)s - -# To use 'nginx-limit-req' jail you should have `ngx_http_limit_req_module` -# and define `limit_req` and `limit_req_zone` as described in nginx documentation -# http://nginx.org/en/docs/http/ngx_http_limit_req_module.html -# or for example see in 'config/filter.d/nginx-limit-req.conf' -[nginx-limit-req] -port = http,https -logpath = %(nginx_error_log)s - -[nginx-botsearch] - -port = http,https -logpath = %(nginx_error_log)s -maxretry = 2 - - -# Ban attackers that try to use PHP's URL-fopen() functionality -# through GET/POST variables. - Experimental, with more than a year -# of usage in production environments. - -[php-url-fopen] - -port = http,https -logpath = %(nginx_access_log)s - %(apache_access_log)s - - -[suhosin] - -port = http,https -logpath = %(suhosin_log)s - - -[lighttpd-auth] -# Same as above for Apache's mod_auth -# It catches wrong authentifications -port = http,https -logpath = %(lighttpd_error_log)s - - -# -# Webmail and groupware servers -# - -[roundcube-auth] - -port = http,https -logpath = %(roundcube_errors_log)s -# Use following line in your jail.local if roundcube logs to journal. -#backend = %(syslog_backend)s - - -[openwebmail] - -port = http,https -logpath = /var/log/openwebmail.log - - -[horde] - -port = http,https -logpath = /var/log/horde/horde.log - - -[groupoffice] - -port = http,https -logpath = /home/groupoffice/log/info.log - - -[sogo-auth] -# Monitor SOGo groupware server -# without proxy this would be: -# port = 20000 -port = http,https -logpath = /var/log/sogo/sogo.log - - -[tine20] - -logpath = /var/log/tine20/tine20.log -port = http,https - - -# -# Web Applications -# -# - -[drupal-auth] - -port = http,https -logpath = %(syslog_daemon)s -backend = %(syslog_backend)s - -[guacamole] - -port = http,https -logpath = /var/log/tomcat*/catalina.out - -[monit] -#Ban clients brute-forcing the monit gui login -port = 2812 -logpath = /var/log/monit - - -[webmin-auth] - -port = 10000 -logpath = %(syslog_authpriv)s -backend = %(syslog_backend)s - - -[froxlor-auth] - -port = http,https -logpath = %(syslog_authpriv)s -backend = %(syslog_backend)s - - -# -# HTTP Proxy servers -# -# - -[squid] - -port = 80,443,3128,8080 -logpath = /var/log/squid/access.log - - -[3proxy] - -port = 3128 -logpath = /var/log/3proxy.log - - -# -# FTP servers -# - - -[proftpd] - -port = ftp,ftp-data,ftps,ftps-data -logpath = %(proftpd_log)s -backend = %(proftpd_backend)s - - -[pure-ftpd] - -port = ftp,ftp-data,ftps,ftps-data -logpath = %(pureftpd_log)s -backend = %(pureftpd_backend)s - - -[gssftpd] - -port = ftp,ftp-data,ftps,ftps-data -logpath = %(syslog_daemon)s -backend = %(syslog_backend)s - - -[wuftpd] - -port = ftp,ftp-data,ftps,ftps-data -logpath = %(wuftpd_log)s -backend = %(wuftpd_backend)s - - -[vsftpd] -# or overwrite it in jails.local to be -# logpath = %(syslog_authpriv)s -# if you want to rely on PAM failed login attempts -# vsftpd's failregex should match both of those formats -port = ftp,ftp-data,ftps,ftps-data -logpath = %(vsftpd_log)s - - -# -# Mail servers -# - -# ASSP SMTP Proxy Jail -[assp] - -port = smtp,465,submission -logpath = /root/path/to/assp/logs/maillog.txt - - -[courier-smtp] - -port = smtp,465,submission -logpath = %(syslog_mail)s -backend = %(syslog_backend)s - - -[postfix] -# To use another modes set filter parameter "mode" in jail.local: -mode = more -port = smtp,465,submission -logpath = %(postfix_log)s -backend = %(postfix_backend)s - - -[postfix-rbl] - -filter = postfix[mode=rbl] -port = smtp,465,submission -logpath = %(postfix_log)s -backend = %(postfix_backend)s -maxretry = 1 - - -[sendmail-auth] - -port = submission,465,smtp -logpath = %(syslog_mail)s -backend = %(syslog_backend)s - - -[sendmail-reject] -# To use more aggressive modes set filter parameter "mode" in jail.local: -# normal (default), extra or aggressive -# See "tests/files/logs/sendmail-reject" or "filter.d/sendmail-reject.conf" for usage example and details. -#mode = normal -port = smtp,465,submission -logpath = %(syslog_mail)s -backend = %(syslog_backend)s - - -[qmail-rbl] - -filter = qmail -port = smtp,465,submission -logpath = /service/qmail/log/main/current - - -# dovecot defaults to logging to the mail syslog facility -# but can be set by syslog_facility in the dovecot configuration. -[dovecot] - -port = pop3,pop3s,imap,imaps,submission,465,sieve -logpath = %(dovecot_log)s -backend = %(dovecot_backend)s - - -[sieve] - -port = smtp,465,submission -logpath = %(dovecot_log)s -backend = %(dovecot_backend)s - - -[solid-pop3d] - -port = pop3,pop3s -logpath = %(solidpop3d_log)s - - -[exim] -# see filter.d/exim.conf for further modes supported from filter: -#mode = normal -port = smtp,465,submission -logpath = %(exim_main_log)s - - -[exim-spam] - -port = smtp,465,submission -logpath = %(exim_main_log)s - - -[kerio] - -port = imap,smtp,imaps,465 -logpath = /opt/kerio/mailserver/store/logs/security.log - - -# -# Mail servers authenticators: might be used for smtp,ftp,imap servers, so -# all relevant ports get banned -# - -[courier-auth] - -port = smtp,465,submission,imap,imaps,pop3,pop3s -logpath = %(syslog_mail)s -backend = %(syslog_backend)s - - -[postfix-sasl] - -filter = postfix[mode=auth] -port = smtp,465,submission,imap,imaps,pop3,pop3s -# You might consider monitoring /var/log/mail.warn instead if you are -# running postfix since it would provide the same log lines at the -# "warn" level but overall at the smaller filesize. -logpath = %(postfix_log)s -backend = %(postfix_backend)s - - -[perdition] - -port = imap,imaps,pop3,pop3s -logpath = %(syslog_mail)s -backend = %(syslog_backend)s - - -[squirrelmail] - -port = smtp,465,submission,imap,imap2,imaps,pop3,pop3s,http,https,socks -logpath = /var/lib/squirrelmail/prefs/squirrelmail_access_log - - -[cyrus-imap] - -port = imap,imaps -logpath = %(syslog_mail)s -backend = %(syslog_backend)s - - -[uwimap-auth] - -port = imap,imaps -logpath = %(syslog_mail)s -backend = %(syslog_backend)s - - -# -# -# DNS servers -# - - -# !!! WARNING !!! -# Since UDP is connection-less protocol, spoofing of IP and imitation -# of illegal actions is way too simple. Thus enabling of this filter -# might provide an easy way for implementing a DoS against a chosen -# victim. See -# http://nion.modprobe.de/blog/archives/690-fail2ban-+-dns-fail.html -# Please DO NOT USE this jail unless you know what you are doing. -# -# IMPORTANT: see filter.d/named-refused for instructions to enable logging -# This jail blocks UDP traffic for DNS requests. -# [named-refused-udp] -# -# filter = named-refused -# port = domain,953 -# protocol = udp -# logpath = /var/log/named/security.log - -# IMPORTANT: see filter.d/named-refused for instructions to enable logging -# This jail blocks TCP traffic for DNS requests. - -[named-refused] - -port = domain,953 -logpath = /var/log/named/security.log - - -[nsd] - -port = 53 -action = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp] - %(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp] -logpath = /var/log/nsd.log - - -# -# Miscellaneous -# - -[asterisk] - -port = 5060,5061 -action = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp] - %(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp] - %(mta)s-whois[name=%(__name__)s, dest="%(destemail)s"] -logpath = /var/log/asterisk/messages -maxretry = 10 - - -[freeswitch] - -port = 5060,5061 -action = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp] - %(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp] - %(mta)s-whois[name=%(__name__)s, dest="%(destemail)s"] -logpath = /var/log/freeswitch.log -maxretry = 10 - - -# To log wrong MySQL access attempts add to /etc/my.cnf in [mysqld] or -# equivalent section: -# log-warning = 2 -# -# for syslog (daemon facility) -# [mysqld_safe] -# syslog -# -# for own logfile -# [mysqld] -# log-error=/var/log/mysqld.log -[mysqld-auth] - -port = 3306 -logpath = %(mysql_log)s -backend = %(mysql_backend)s - - -# Log wrong MongoDB auth (for details see filter 'filter.d/mongodb-auth.conf') -[mongodb-auth] -# change port when running with "--shardsvr" or "--configsvr" runtime operation -port = 27017 -logpath = /var/log/mongodb/mongodb.log - - -# Jail for more extended banning of persistent abusers -# !!! WARNINGS !!! -# 1. Make sure that your loglevel specified in fail2ban.conf/.local -# is not at DEBUG level -- which might then cause fail2ban to fall into -# an infinite loop constantly feeding itself with non-informative lines -# 2. Increase dbpurgeage defined in fail2ban.conf to e.g. 648000 (7.5 days) -# to maintain entries for failed logins for sufficient amount of time -[recidive] - -logpath = /var/log/fail2ban.log -banaction = %(banaction_allports)s -bantime = 1w -findtime = 1d - - -# Generic filter for PAM. Has to be used with action which bans all -# ports such as iptables-allports, shorewall - -[pam-generic] -# pam-generic filter can be customized to monitor specific subset of 'tty's -banaction = %(banaction_allports)s -logpath = %(syslog_authpriv)s -backend = %(syslog_backend)s - - -[xinetd-fail] - -banaction = iptables-multiport-log -logpath = %(syslog_daemon)s -backend = %(syslog_backend)s -maxretry = 2 - - -# stunnel - need to set port for this -[stunnel] - -logpath = /var/log/stunnel4/stunnel.log - - -[ejabberd-auth] - -port = 5222 -logpath = /var/log/ejabberd/ejabberd.log - - -[counter-strike] - -logpath = /opt/cstrike/logs/L[0-9]*.log -# Firewall: http://www.cstrike-planet.com/faq/6 -tcpport = 27030,27031,27032,27033,27034,27035,27036,27037,27038,27039 -udpport = 1200,27000,27001,27002,27003,27004,27005,27006,27007,27008,27009,27010,27011,27012,27013,27014,27015 -action = %(banaction)s[name=%(__name__)s-tcp, port="%(tcpport)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp] - %(banaction)s[name=%(__name__)s-udp, port="%(udpport)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp] - -# consider low maxretry and a long bantime -# nobody except your own Nagios server should ever probe nrpe -[nagios] - -logpath = %(syslog_daemon)s ; nrpe.cfg may define a different log_facility -backend = %(syslog_backend)s -maxretry = 1 - - -[oracleims] -# see "oracleims" filter file for configuration requirement for Oracle IMS v6 and above -logpath = /opt/sun/comms/messaging64/log/mail.log_current -banaction = %(banaction_allports)s - -[directadmin] -logpath = /var/log/directadmin/login.log -port = 2222 - -[portsentry] -logpath = /var/lib/portsentry/portsentry.history -maxretry = 1 - -[pass2allow-ftp] -# this pass2allow example allows FTP traffic after successful HTTP authentication -port = ftp,ftp-data,ftps,ftps-data -# knocking_url variable must be overridden to some secret value in jail.local -knocking_url = /knocking/ -filter = apache-pass[knocking_url="%(knocking_url)s"] -# access log of the website with HTTP auth -logpath = %(apache_access_log)s -blocktype = RETURN -returntype = DROP -action = %(action_)s[blocktype=%(blocktype)s, returntype=%(returntype)s] -bantime = 1h -maxretry = 1 -findtime = 1 - - -[murmur] -# AKA mumble-server -port = 64738 -action = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol=tcp, chain="%(chain)s", actname=%(banaction)s-tcp] - %(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol=udp, chain="%(chain)s", actname=%(banaction)s-udp] -logpath = /var/log/mumble-server/mumble-server.log - - -[screensharingd] -# For Mac OS Screen Sharing Service (VNC) -logpath = /var/log/system.log -logencoding = utf-8 - -[haproxy-http-auth] -# HAProxy by default doesn't log to file you'll need to set it up to forward -# logs to a syslog server which would then write them to disk. -# See "haproxy-http-auth" filter for a brief cautionary note when setting -# maxretry and findtime. -logpath = /var/log/haproxy.log - -[slapd] -port = ldap,ldaps -logpath = /var/log/slapd.log - -[domino-smtp] -port = smtp,ssmtp -logpath = /home/domino01/data/IBM_TECHNICAL_SUPPORT/console.log - -[phpmyadmin-syslog] -port = http,https -logpath = %(syslog_authpriv)s -backend = %(syslog_backend)s - - -[zoneminder] -# Zoneminder HTTP/HTTPS web interface auth -# Logs auth failures to apache2 error log -port = http,https -logpath = %(apache_error_log)s - diff --git a/jail.local b/jail.local deleted file mode 100644 index 8b23c42..0000000 --- a/jail.local +++ /dev/null @@ -1,84 +0,0 @@ -[DEFAULT] - -ignoreip = 127.0.0.1/8 IP -bantime = 3600 -findtime = 3600 -#mta = mail -#destemail = -#sendername = Fail2BanAlerts -#action = %(action_mwl)s - -[nginx-http-auth] - -enabled = true -filter = nginx-http-auth -port = http,https -logpath = /var/log/nginx/*error.log -bantime = 259200 - -#[nginx-badbots] - -#enabled = true -#port = http,https -#filter = nginx-badbots -#logpath = /var/log/nginx/access.log -#maxretry = 2 - -[nginx-badbots] - -enabled = true -port = http,https -filter = nginx-badbots -failregex = ^ -.*"(GET|POST|HEAD).*HTTP.*" 437 -#ignoreregex = -backend = auto -logpath = /var/log/nginx/*access.log -bantime = 259200 -maxretry= 1 - -[nginx-nohome] - -enabled = true -port = http,https -filter = nginx-nohome -logpath = /var/log/nginx/*access.log -bantime = 259200 -maxretry = 2 - -[nginx-noproxy] - -enabled = true -port = http,https -filter = nginx-noproxy -logpath = /var/log/nginx/*access.log -bantime = 259200 -maxretry = 2 - -[nginx-req-limit] - -enabled = true -filter = nginx-req-limit -action = iptables-multiport[name=ReqLimit, port="http,https", protocol=tcp] -logpath = /var/log/nginx/*error.log -findtime = 600 -bantime = 259200 -maxretry = 10 - -[nginx-conn-limit] - -enabled = true -filter = nginx-conn-limit -action = iptables-multiport[name=ConnLimit, port="http,https", protocol=tcp] -logpath = /var/log/nginx/*error.log -findtime = 300 -bantime = 259200 -maxretry = 100 - -[ssh] - -enabled = true -port = SSH_PORT -filter = sshd -logpath = /var/log/auth.log -maxretry = 3 -bantime = -1 \ No newline at end of file diff --git a/nginx-conf/nginx-badbots.conf b/nginx-conf/nginx-badbots.conf deleted file mode 100644 index 8588c69..0000000 --- a/nginx-conf/nginx-badbots.conf +++ /dev/null @@ -1,25 +0,0 @@ -# Fail2Ban configuration file -# -# Regexp to catch known spambots and software alike. Please verify -# that it is your intent to block IPs which were driven by -# above mentioned bots. - - -[Definition] - -badbotscustom = EmailCollector|WebEMailExtrac|TrackBack/1\.02|sogou music spider|(?:Mozilla/\d+\.\d+ )?Jorgee -badbots = Atomic_Email_Hunter/4\.0|atSpider/1\.0|autoemailspider|bwh3_user_agent|China Local Browse 2\.6|ContactBot/0\.2|ContentSmartz|DataCha0s/2\.0|DBrowse 1\.4b|DBrowse 1\.4d|Demo Bot DOT 16b|Demo Bot Z 16b|DSurf15a 01|DSurf15a 71|DSurf15a 81|DSurf15a VA|EBrowse 1\.4b|Educate Search VxB|EmailSiphon|EmailSpider|EmailWolf 1\.00|ESurf15a 15|ExtractorPro|Franklin Locator 1\.8|FSurf15a 01|Full Web Bot 0416B|Full Web Bot 0516B|Full Web Bot 2816B|Guestbook Auto Submitter|Industry Program 1\.0\.x|ISC Systems iRc Search 2\.1|IUPUI Research Bot v 1\.9a|LARBIN-EXPERIMENTAL \(efp@gmx\.net\)|LetsCrawl\.com/1\.0 \+http\://letscrawl\.com/|Lincoln State Web Browser|LMQueueBot/0\.2|LWP\:\:Simple/5\.803|Mac Finder 1\.0\.xx|MFC Foundation Class Library 4\.0|Microsoft URL Control - 6\.00\.8xxx|Missauga Locate 1\.0\.0|Missigua Locator 1\.9|Missouri College Browse|Mizzu Labs 2\.2|Mo College 1\.9|MVAClient|Mozilla/2\.0 \(compatible; NEWT ActiveX; Win32\)|Mozilla/3\.0 \(compatible; Indy Library\)|Mozilla/3\.0 \(compatible; scan4mail \(advanced version\) http\://www\.peterspages\.net/?scan4mail\)|Mozilla/4\.0 \(compatible; Advanced Email Extractor v2\.xx\)|Mozilla/4\.0 \(compatible; Iplexx Spider/1\.0 http\://www\.iplexx\.at\)|Mozilla/4\.0 \(compatible; MSIE 5\.0; Windows NT; DigExt; DTS Agent|Mozilla/4\.0 efp@gmx\.net|Mozilla/5\.0 \(Version\: xxxx Type\:xx\)|NameOfAgent \(CMS Spider\)|NASA Search 1\.0|Nsauditor/1\.x|PBrowse 1\.4b|PEval 1\.4b|Poirot|Port Huron Labs|Production Bot 0116B|Production Bot 2016B|Production Bot DOT 3016B|Program Shareware 1\.0\.2|PSurf15a 11|PSurf15a 51|PSurf15a VA|psycheclone|RSurf15a 41|RSurf15a 51|RSurf15a 81|searchbot admin@google\.com|ShablastBot 1\.0|snap\.com beta crawler v0|Snapbot/1\.0|Snapbot/1\.0 \(Snap Shots, \+http\://www\.snap\.com\)|sogou develop spider|Sogou Orion spider/3\.0\(\+http\://www\.sogou\.com/docs/help/webmasters\.htm#07\)|sogou spider|Sogou web spider/3\.0\(\+http\://www\.sogou\.com/docs/help/webmasters\.htm#07\)|sohu agent|SSurf15a 11 |TSurf15a 11|Under the Rainbow 2\.2|User-Agent\: Mozilla/4\.0 \(compatible; MSIE 6\.0; Windows NT 5\.1\)|VadixBot|WebVulnCrawl\.unknown/1\.0 libwww-perl/5\.803|Wells Search II|WEP Search 00 - -failregex = ^ -.*"(GET|POST|HEAD).*HTTP.*"(?:%(badbots)s|%(badbotscustom)s)"$ - -ignoreregex = - -datepattern = ^[^\[]*\[({DATE}) - {^LN-BEG} - -# DEV Notes: -# List of bad bots fetched from http://www.user-agents.org -# Generated on Thu Nov 7 14:23:35 PST 2013 by files/gen_badbots. -# -# Author: Yaroslav Halchenko - diff --git a/nginx-conf/nginx-botsearch.conf b/nginx-conf/nginx-botsearch.conf deleted file mode 100644 index 0be895b..0000000 --- a/nginx-conf/nginx-botsearch.conf +++ /dev/null @@ -1,23 +0,0 @@ -# Fail2Ban filter to match web requests for selected URLs that don't exist -# - -[INCLUDES] - -# Load regexes for filtering -before = botsearch-common.conf - -[Definition] - -failregex = ^ \- \S+ \[\] \"(GET|POST|HEAD) \/ \S+\" 404 .+$ - ^ \[error\] \d+#\d+: \*\d+ (\S+ )?\"\S+\" (failed|is not found) \(2\: No such file or directory\), client\: \, server\: \S*\, request: \"(GET|POST|HEAD) \/ \S+\"\, .*?$ - -ignoreregex = - -datepattern = {^LN-BEG}%%ExY(?P<_sep>[-/.])%%m(?P=_sep)%%d[T ]%%H:%%M:%%S(?:[.,]%%f)?(?:\s*%%z)? - ^[^\[]*\[({DATE}) - {^LN-BEG} - -# DEV Notes: -# Based on apache-botsearch filter -# -# Author: Frantisek Sumsal \ No newline at end of file diff --git a/nginx-conf/nginx-conn-limit.conf b/nginx-conf/nginx-conn-limit.conf deleted file mode 100644 index 6838bf6..0000000 --- a/nginx-conf/nginx-conn-limit.conf +++ /dev/null @@ -1,10 +0,0 @@ -# Fail2Ban configuration file -# # supports: ngx_http_limit_conn_module - -[Definition] -failregex = limiting connections by zone.*client: - -# Option: ignoreregex -# Notes.: regex to ignore. If this regex matches, the line is ignored. -# Values: TEXT # ignoreregex = - diff --git a/nginx-conf/nginx-http-auth.conf b/nginx-conf/nginx-http-auth.conf deleted file mode 100644 index 93341cd..0000000 --- a/nginx-conf/nginx-http-auth.conf +++ /dev/null @@ -1,17 +0,0 @@ -# fail2ban filter configuration for nginx - - -[Definition] - - -failregex = ^ \[error\] \d+#\d+: \*\d+ user "(?:[^"]+|.*?)":? (?:password mismatch|was not found in "[^\"]*"), client: , server: \S*, request: "\S+ \S+ HTTP/\d+\.\d+", host: "\S+"(?:, referrer: "\S+")?\s*$ - -ignoreregex = - -datepattern = {^LN-BEG} - -# DEV NOTES: -# Based on samples in https://github.com/fail2ban/fail2ban/pull/43/files -# Extensive search of all nginx auth failures not done yet. -# -# Author: Daniel Black diff --git a/nginx-conf/nginx-limit-req.conf b/nginx-conf/nginx-limit-req.conf deleted file mode 100644 index e23548a..0000000 --- a/nginx-conf/nginx-limit-req.conf +++ /dev/null @@ -1,46 +0,0 @@ -# Fail2ban filter configuration for nginx :: limit_req -# used to ban hosts, that were failed through nginx by limit request processing rate -# -# Author: Serg G. Brester (sebres) -# -# To use 'nginx-limit-req' filter you should have `ngx_http_limit_req_module` -# and define `limit_req` and `limit_req_zone` as described in nginx documentation -# http://nginx.org/en/docs/http/ngx_http_limit_req_module.html -# -# Example: -# -# http { -# ... -# limit_req_zone $binary_remote_addr zone=lr_zone:10m rate=1r/s; -# ... -# # http, server, or location: -# location ... { -# limit_req zone=lr_zone burst=1 nodelay; -# ... -# } -# ... -# } -# ... -# - -[Definition] - -# Specify following expression to define exact zones, if you want to ban IPs limited -# from specified zones only. -# Example: -# -# ngx_limit_req_zones = lr_zone|lr_zone2 -# -ngx_limit_req_zones = [^"]+ - -# Use following full expression if you should range limit request to specified -# servers, requests, referrers etc. only : -# -# failregex = ^\s*\[[a-z]+\] \d+#\d+: \*\d+ limiting requests, excess: [\d\.]+ by zone "(?:%(ngx_limit_req_zones)s)", client: , server: \S*, request: "\S+ \S+ HTTP/\d+\.\d+", host: "\S+"(, referrer: "\S+")?\s*$ - -# Shortly, much faster and stable version of regexp: -failregex = ^\s*\[[a-z]+\] \d+#\d+: \*\d+ limiting requests, excess: [\d\.]+ by zone "(?:%(ngx_limit_req_zones)s)", client: , - -ignoreregex = - -datepattern = {^LN-BEG} diff --git a/nginx-conf/nginx-nohome.conf b/nginx-conf/nginx-nohome.conf deleted file mode 100644 index 83d065e..0000000 --- a/nginx-conf/nginx-nohome.conf +++ /dev/null @@ -1,6 +0,0 @@ -[Definition] - -failregex = ^ -.*GET .*/~.* - -ignoreregex = - diff --git a/nginx-conf/nginx-noproxy.conf b/nginx-conf/nginx-noproxy.conf deleted file mode 100644 index 7e4195e..0000000 --- a/nginx-conf/nginx-noproxy.conf +++ /dev/null @@ -1,7 +0,0 @@ -[Definition] - -failregex = ^ -.*GET http.* - -ignoreregex = - - diff --git a/nginx-conf/nginx-req-limit.conf b/nginx-conf/nginx-req-limit.conf deleted file mode 100644 index ab8c4bf..0000000 --- a/nginx-conf/nginx-req-limit.conf +++ /dev/null @@ -1,9 +0,0 @@ -# Fail2Ban configuration file # -# supports: ngx_http_limit_req_module - -[Definition] -failregex = limiting requests, excess:.* by zone.*client: - -# Option: ignoreregex -# Notes.: regex to ignore. If this regex matches, the line is ignored. # Values: TEXT # ignoreregex = -